Sunday, 5 February 2012

Carnelia Antique Lilac

Carnelia - Gallery 2010 - Antique Lilac: "Carnelia"

'via Blog this'

Costume design for art dolls'



  The wings are sewn, painted, and wired fabric; their end wires insert into narrow pockets 
on the back of the bodice. The headband is braided leather.



 The rust brocade bodice is lined, has hand embroidered edging, and laces up the front. 
The 'sleeves'  slip on and have snaps from the elbow to the wrist 
- to fit over the hand and ensure a snug fit.


 All three skirts have frayed and stained hemlines. 
The long rust and short pink skirts have 'tears' which have been sewn up with silk ribbon.  
Shells and assorted ornaments dangle from the bottom of the shortest skirt. 


Beautifully inspiring work!

Love, peace & light
Trace
oxo


Make a set of wired wings for your favourite fairy.

Wired Wings


A more advanced version of 'Simple Wired Wings'by Antique lilac, and are sewn from semi-sheer fabric, with wires inserted which slip into pockets sewn onto the back of the costume bodice. 

The tutorial covers the steps involved in making the wings.

Please go HERE for full instructions. 



 Materials
  - sheer fabric (with some body - not too flimsy)
  - scissors
  - wire - thickness depends on size of wings being 
     made. For MSD size wings use an 18 gauge.
  - pliers
  - sewing machine & thread
  - Fray Check
  - iron
  - needle
  - hot glue gun
  - acrylic or Folk Art Paint in colours to match your      
     fairy outfit
  - Textile Medium
  - brushes
  - glitter paint

Print and cut out wing pattern. 
Pin pattern onto double layer sheer fabric. 
Trace upper edge of pattern onto fabric and cut with a 3/8" seam allowance along the top edge and leaving plenty of excess 
around the other outer edges of wing pattern.
Pin sewn wing onto pattern to keep it from moving, and trace vein lines
onto fabric with pencil. 
Remove pattern from back of wing and re-pin fabric. 
Press wing, then trace outer wing edge onto fabric. 
Cut outer wing edge being careful not 
to clip ends of sewn vein lines. 
Draw a line of Fray Check along outer wing edge. Let Dry.
Insert wires into fabric pockets. 
Thread needle with strong thread, knot end, and thread
 through one of the wing pockets. 
Pull fabric back along wires, apply a bit of hot glue to the
 two wire ends and pull fabric back over wires. 
Quickly stitch securely with needle and thread.

Wing Pattern
This tutorial includes the actual size wing patterns used for making the Fairy wings, 
as well as several other wing patterns you may want to try. 

To download the pattern pdf click on the Wings Pattern HERE

Have fun :0)

love,peace & light
Trace
oxo

~Fairy Skirt Project~ : BJDcollectasy.com

~Fairy Skirt Project~ : BJDcollectasy.com:

'via Blog this'
Make a Fairy Skirt with a Tattered, Stained Hemline Embellished with Dangling Fairy Treasures
by Martha Boers of Antique Lilac


This tutorial reveals how I make my tattered fairy skirts. The instructions are for the tattering and staining of the skirt fabric, and do not include an actual skirt pattern.
Materials
- soft 100% cotton fabric in desired colour (I use cotton crinkle gauze)
- scissors
- acrylic folk art paint in a darker colour
- textile medium
- old brushes
- plastic tablecloth or placemat to work on
- iron
- silk ribbon in colours to match stained fabric. Must be silk ribbon (can substitute embroidery floss if silk ribbon is not available)
- assorted sized beads, shells, charms- matching thread
- sewing & beading needles
- thread

 Cut fabric for skirt, making the back an inch longer than the front. 
Cut a waistband to fit your doll, and gather skirt fabric onto waistband. 
Finish skirt waistband and sew up the back seam. 
Clip the bottom of the skirt as shown alternating short,
 medium and long clips into the fabric and rounding off the corners a little. 
To make a ‘hole’, clip a small triangle into the fabric as shown.
Unravel the clipped edge by hand.


  Optional – run the skirt with unraveled bottom through a wash 
and dry cycle with your laundry to soften the unraveled fibres.
Wet the bottom half of the skirt.
 Choose a darker colour paint, mix with an equal part textile medium, 
and thin with water.
 Work on a plastic tablecloth or place mat. 
With an old brush, work the diluted paint into all the wet ragged edges, 
and around any holes. 
Let air-dry completely – do not use forced heat as it will make the paint colour dry unevenly.


 Heat-set the paint with an iron.
 Wet the ironed hemline again to soften it and put he wrinkles back in. 
Let dry thoroughly.


 Gather matching-coloured silk ribbon and beads, shells, charms.
Thread silk ribbon through eye of a large needle and stitch through bottom of skirt edge. 
Then thread a needle, which will fit through the larger beads, with a double thread forming a loop.
Thread your desired beads onto the needle, and insert silk ribbon tails through loop in thread.

 Click HERE for further instruction - embellishment

A beautiful tutorial, and a talented artist.
Happy creating!!

Love, peace & light
Trace
oxo

Thursday, 19 January 2012

Art Dolls Only Ezine

One off online magazine by the Art Dolls Only group, showcasing the work of over 100 contemporary doll artists. Lots of interesting and informative articles and beautiful photographs explore the diverse world of the ADO members. Also we take a tour of some International doll museums and there are some projects and patterns for you to try your hand at too. A must read for all Art Doll lovers!


Enjoy

Love, peace
& light
Trace
oxo